Nieuw project Hulp nodig?
Laatste reacties
Russin Sir Bullar
Russin Sir Bullar 32 minuten geleden
I get this from :  pins: SDA SDL ; I guess they sent me a malfuntućtioning  OLED-display ??
180348 DIY soldering station
Russin Sir Bullar
Russin Sir Bullar 1 uur geleden
1:   You wrote:If you use the Arduino IDE you don't need to do this, because the IDE does it all for you. But HOW do I load the HEX-file ?? into the IDE ?? 2: It was somwhere suggested that I should be able to:Since firmware version 1.2 the serial console is included, that allows you to set and read the setpoint of the station, also you can read the current temperature and if any, the errors the station has. You simply can connect the station with a usb cable to the pc and use the arduino ide integrated terminal for the commands. But HOW IS THAT DONE ? I got the TERMINAL to respond to:ls -l /dev/ttyACM* and sudo usermod -a -G dialout <username>  (my username of course!) like this: mate18@mate18-desktop ~ $ ls -l /dev/ttyACM* crw-rw---- 1 root dialout 166, 0 jul 19 09:39 /dev/ttyACM0 mate18@mate18-desktop ~ $ ls -l /dev/ttyACM* sudo usermod -a -G dialout <username> bash: syntaxfel nära den oväntade symbolen "newline" mate18@mate18-desktop ~ $ sudo usermod -a -G dialout mate18 [sudo] lösenord för mate18: But then ?  WHAT SHALL I WRITE and what do I get in return ? Can this help me to understand if the display is malfunctioning or if the compiled code is wrong ???  
180348 DIY soldering station
ElektorLabs 3 uur geleden
avrdude is used a lot for AVR programming. It has many options so explaiing its usage in three words in detail is not easy. Search the Internet for a tutorial. For the Arduino-compatible board of this project the command line would look something like this (untested!): avrdude -p atmega32u4 -P COM1 -carduino -D -U flash:w:MyProgram.hex:i The HEX file name should be adapted to your file and the port ("COM1") must be the port used by your board. If you use the Arduino IDE you don't need to do this, because the IDE does it all for you.
180348 DIY soldering station
ALFREDO Hp PEREZ 4 uur geleden
K. Horton , Cómo está Ud, tu versión de POV está muy bueno serias gentil de enviarme los archivos que necesitaste para construir tu versión, no te digo que me lo envies gratis. de eso nos podremos de acuerdo por interno, mi correo es estoy muy interesado en adquirir tus archivos.  espero pronta tu respuesta. saludos.
High-end propeller clock [120732]
Russin Sir Bullar
Russin Sir Bullar 1 dag geleden
Does anyone know if and how AVRDUDE is used ?  
180348 DIY soldering station